When something goes wrong with the plumbing in a Cross Mountain home, the fix needs to happen without a lot of back-and-forth. We handle everything from a faucet that drips overnight to a water heater that stopped working this morning to a sewer line that needs to come out and be replaced. The full range of residential plumbing work is what we do, and we cover Cross Mountain and the surrounding area every day from 8 AM to 11 PM, including evenings and weekends.
Cross Mountain is a town of single-family homes, and the plumbing calls we take here reflect that. Homeowners dealing with a slow drain, a running toilet, or a sudden drop in water pressure are the most common callers. So are property owners who have noticed something is not quite right but are not sure what it means yet. Whatever the situation, the process starts the same way: call, describe what is happening, get a price, and confirm the schedule. We handle the rest.
It does, and in a town like Cross Mountain where the housing stock includes homes that have been in place for decades, that question comes up regularly. Older supply lines in this region were often run in galvanized steel, and that material corrodes from the inside out over time. The result shows up as water with a rust tint, pressure that has dropped gradually without any obvious cause, or pinhole leaks that keep returning in different spots along the same run of pipe.
The other issue with older homes is fittings. Plumbing standards have changed, and what was installed thirty or forty years ago does not always accept a direct replacement from anything sold today. A repair that looks straightforward from the outside sometimes requires sourcing a transition fitting or rerouting a short section of line to bring the connection up to current standards. We scope that on the call and explain what the job involves before we schedule anything.
There is a point at which patching an older system costs more over time than replacing it. When a home's supply lines have reached the end of their useful life, a full repipe with copper or PEX addresses the problem at the source rather than working through it one leak at a time. The work involves opening walls and ceilings in sections, replacing the lines throughout the house, and restoring the openings when the new pipe is in place. It is a larger job, but the result is consistent pressure and clean water throughout the house.
Slab-on-grade construction is common across this part of Texas, which means supply lines often run beneath or within the concrete foundation. In an older home, those lines can develop slow leaks that move under the slab for weeks before showing up as a wet floor, a warm spot underfoot, or a water bill that has climbed without explanation. We locate the fault using pressure testing and electronic detection before any concrete is opened, which keeps the repair focused and the disruption to the home minimal.
A pressure regulator controls how hard the water hits every fixture and appliance in the house. When one fails, the symptoms range from pressure that feels weak at every faucet to pressure so high that fixtures drip after they are turned off or pipes knock when water is running. A regulator replacement starts at the meter, where the existing unit is removed and a new one is set to the correct pressure for the home's supply line. The fix resolves the symptom at the source rather than chasing it fixture by fixture.
A disposal that hums but does not spin, trips its reset repeatedly, or leaks from the base or the drain connection is usually at the end of its useful life. Installation covers removing the old unit, mounting the new one to the sink flange, and confirming the drain connection is solid before the job is done. If the drain line under the sink has accumulated buildup, we address that as part of the installation so the new disposal does not inherit the old problem.
On the plumbing side, gas line work covers the supply line that connects to a water heater or a similar appliance. A line that has a slow leak, a corroded fitting, or a connection that was never properly sealed needs to be addressed before the appliance is used. We handle gas line installation for new water heater setups and repair or replacement of existing lines where the condition of the pipe or the fitting is the issue.
A running toilet is one of those problems that is easy to put off because it is not dramatic. The water bill tells a different story. The flapper, the fill valve, and the flush valve are the most common causes, and the repair is usually straightforward once the cause is identified. A toilet that leaks at the base or at the supply connection is a different problem, one that can damage flooring and the substructure underneath if it is left alone. Both are worth a call.
We also handle faucet and sink repair, drain cleaning and clog removal, and hydro jetting for lines where a standard snake is not enough to clear the buildup. Repiping and pipe replacement are available for homes where the supply lines have reached the end of their service life.
We are available every day from 8 AM to 11 PM, and that includes evenings and weekends. Short-notice scheduling is available for urgent calls, so ask what the calendar allows when you phone.
When a pipe has burst, a water heater has failed, or a drain has backed up into the house, call (830) 549-8959 and describe what is happening.
We walk through what to do right now and confirm what the schedule allows for getting someone out.
Plumbing visits are scheduled without the runaround. You get the rate on the phone before anything is booked, and the scope is confirmed before the visit starts. For tenants and households that need to stay functional while work is being done, we discuss what can be isolated and what has to be shut off, and we work around the situation rather than shutting down the house for longer than the job requires.
We find the leak. We fix the line. We test the pressure. If the scope is still open, the page that lists our plumbing services is the place to start.
A restaurant, a retail space, or a multi-unit building has different constraints than a single-family home. A full water shutoff that runs for hours is not always an option. We discuss what can be isolated before the visit so the scope of the interruption is as narrow as possible. In many cases, a section of the supply line can be shut off while the rest of the building stays live. We confirm what is feasible on the call and schedule around the property's operating hours where the work allows it.
For landlords and property managers, the priority is usually getting the repair done without disrupting tenants more than necessary. We coordinate access, confirm what the visit will involve, and give a clear picture of the work before anything starts. Drain cleaning, sewer line service, water heater replacement, and fixture repair are the most common calls from rental properties, and each one follows the same process: scope it, price it, schedule it, and do the work.
The rate for any plumbing job is discussed on the call, before the visit is scheduled. We describe what the job typically involves and what the visit will cover. You get the information you need before anyone shows up at the door.
What moves a quote is what the job actually turns out to be. A repair that looks like a simple fixture swap sometimes involves a corroded supply stub or a drain connection that has to be rebuilt. A sewer line that looks like a cleaning job sometimes turns out to need a camera inspection and a section repair. When the scope changes on site, we talk through the options before proceeding. Pricing agreed up front. Code-compliant work. Reliable water.
Call (830) 549-8959 and describe what you are dealing with. The price is confirmed before anything is scheduled.
Knowing where the main shutoff is before a problem develops is one of the more useful things a homeowner can do. In most homes, the main shutoff valve is near the point where the supply line enters the house, often in a utility room, a garage, or at the meter outside. Turning it off stops water from continuing to move through the system while you wait for the visit.
For a single fixture that is leaking, the shutoff is usually directly below the sink or behind the toilet. Closing that valve isolates the problem without shutting down the rest of the house. For a burst pipe inside a wall, the main shutoff is the right call. For a water heater that is leaking at the base, close the cold supply line that feeds the tank and turn off the power or gas to the unit. Each of those steps limits the damage and makes the repair more straightforward when someone arrives.
We cover Cross Mountain and the surrounding area across Bexar County. Neighboring communities including Gray Forest, Scenic Oaks, Helotes, Fair Oaks Ranch, and Shavano Park are all part of the area we serve. If you are in one of those towns or nearby and are not sure whether we cover your address, call and we will confirm it.
With a local shop, your questions go straight to the people doing the work. When you call, you reach someone who can talk through what the plumbing is doing and scope the job on the phone.
Call (830) 549-8959 and we will confirm coverage and get the visit on the schedule.
Sometimes. Whether a job can be staged depends on what the work involves and whether a partial repair leaves the system in a safe and functional condition between visits. We will tell you on the call whether staging is a workable option for the specific job.
This part of Texas draws from limestone aquifers, and the water carries a high mineral load. That mineral content leaves scale inside pipes, on fixture valves, and inside water heater tanks, shortening the life of all three. A water softener installation addresses the problem at the point where water enters the house, protecting the supply lines and appliances downstream from continued buildup. If you have noticed white deposits on fixtures or a water heater that is not performing as well as it used to, that is worth discussing on the call.
In a town of single-family homes, the calls we see most often involve older supply lines, tree-root intrusion in sewer lines, and fixtures that have worn out rather than failed suddenly. Older homes in this region sometimes carry galvanized pipe that has narrowed with mineral buildup, which shows up as low pressure or rust-colored water. Tree roots follow moisture to sewer lines in neighborhoods with mature trees, and a sewer line service visit starts with a camera inspection to understand what is in the pipe before anything is cleared or repaired.
Call and describe the situation at the property, including what the problem is and what access looks like. We confirm the scope and the price on the call, and we discuss how the visit can be scheduled around the tenant's availability. For urgent repairs, ask what the schedule allows and we will work to fit the job in quickly. The goal is to get the repair done without more disruption to the tenant than the job requires.
It can. When a main line is blocked, running water from any fixture adds to the backup. If drains throughout the house are slow or backing up, stop running water until the line is cleared. Call and we will walk through what to do while we arrange the visit.
Yes. When we remove a fixture, a water heater, or a section of pipe, we take the old material with us. You are not left managing disposal of what came out.
Sometimes. Whether a temporary repair is appropriate depends on what is failing and what the risk is of leaving it partially addressed. We will tell you honestly on the call whether a short-term fix makes sense or whether the situation calls for the full repair right away.
Describe what the plumbing is doing, where the problem is, and how long it has been happening. That is enough to get a price and confirm the schedule. We are available every day from 8 AM to 11 PM, including weekends and evenings.
Call (830) 549-8959 and a few questions later, you will know what the repair involves and what it will cost.
Plumbing work also reaches these towns: Boerne, Balcones Heights, Elmendorf, Sandy Oaks, Wimberley. Everywhere else we go is in our complete town list.
From a slow kitchen drain to a slab leak beneath the foundation, we handle the full range of plumbing repair and installation work across Cross Mountain and Bexar County. Every service starts the same way: a call, a description of the problem, and a price before anything is scheduled. The table below lays out what each service covers, who it fits, and what is worth knowing before you call.
| Plumbing Service | What the Job Covers | Typical Situations | Good to Know |
|---|---|---|---|
| Garbage Disposal Service | Disposal replacementDrain connection inspectionElectrical and mount checkOld unit removal | Homeowners with a disposal that hums but will not spin, leaks from the bottom, or trips the reset repeatedly | We check the drain connection under the sink as part of every installation so the new unit does not inherit a partial blockage from the old one. |
| Water Pressure and Shutoff Valve Repair | Pressure regulator testing and replacementShutoff valve replacementSupply line restriction diagnosisWhole-house pressure diagnostics | Homes with pressure that has dropped gradually or that varies by fixture | In older Cross Mountain homes with galvanized pipe, mineral buildup inside the line is a common cause of pressure decline that gets worse over time. |
| Water Heater Repair and ReplacementMost Popular | Tank and tankless unitsHeating element and thermostat diagnosisFull unit replacementCommercial water heater service | Households or businesses with no hot water, inconsistent temperature, or a unit past its useful life | A failed heating element or sediment buildup can often be corrected without replacing the whole unit. We diagnose first. |
Call (830) 549-8959 and describe what you are dealing with. We will walk you through what the repair involves and give you a price before anything is scheduled.
(830) 549-8959